Catalog


Catalog mainpage » Thermal–sound and water insulation materials » Isomaster EPS
 

ISOMASTER EPS 30

Fields of application Non-loadable thermal insulation board, as non-passable insulation of loft spaces, among wooden battens under OSB sheet boarding, in expansions gaps of buildings.

Marking
 blue line

Compression strength (10%)

30 kPa
Declared thermal conductivity (λD) 0.04 W/mK
Water vapour resistance factor (μ)20-40
DesignationEPS EN 13163-T1-L1-W1-S1-P4-DS(70)3-BS50-CS(10)30-DS(N)5
  

 

Width
Available
Code
2 cm
 0,24 m3/bale, 24 pcs/bale
 0501-03002000
3 cm
 0,24 m3/bale, 16 pcs/bale
 0501-03003000
4 cm
 0,24 m3/bale, 12 pcs/bale
 0501-03004000
5 cm
 0,25 m3/bale, 10 pcs/bale
 0501-03005000
6 cm
 0,24 m3/bale, 8 pcs/bale
 0501-03006000
7 cm
 0,245 m3/bale, 7 pcs/bale
 0501-03007000
8 cm
 0,24 m3/bale, 6 pcs/bale
 0501-03008000
10 cm
 0,25 m3/bale, 5 pcs/bale
 0501-03010000
12 cm
 0,24 m3/bale, 4 pcs/bale
 0501-03012000

 

ISOMASTER EPS-70

Fields of application thermal insulation under moderate load. In ventilated cold roof
structures, with ventilated air gap behind assembled façade covering; with or without a ventilated air gap in double-layer masonry; on the lower plane of a slab with or without covering, among wooden battens under OSB sheet boarding.

Marking
 2 × blue line
Compression strength (10%) 70 kPa
Declared thermal conductivity (λD) 0.038 W/mK
Water vapour resistance factor (μ)30-40
DesignationEPS EN 13163-T1-L1-W1-S1-P4-DS(70.-)3-BS115-CS(10)70-DS(N)5
  

 

With
Available
Code
2 cm
 0,24 m3/bale, 24 pcs/bale
 0501-07002000
3 cm
 0,24 m3/bale, 16 pcs/bale
 0501-07003000
4 cm
 0,24 m3/bale, 12 pcs/bale
 0501-07004000
5 cm
 0,25 m3/bale, 10 pcs/bale
 0501-07005000
6 cm
 0,24 m3/bale, 8 pcs/bale
 0501-07006000
7 cm
 0,245 m3/bale, 7 pcs/bale
 0501-07007000
8 cm
0,24 m3/bale, 6 pcs/bale 0501-07008000
10 cm
 0,25 m3/bale, 5 pcs/bale
 0501-07010000
12 cm
 0,24 m3/bale, 4 pcs/bale
0501-07012000

 

ISOMASTER EPS H-80

Materialexpanded polystyrene
Field of applicationThermal insulation of external thermal insulation systems,
covered with proper finishing coat (e.g. acrylic or silicone rendering).
Designation EPS EN 13163 T2-L2-W2-S2-P4-BS125-CS(10)80-DS(N)2-DS(70,-)3-TR150

Marking
 red line
Compression strength (10%) 80 kPa
Reaction to fire Class: E (according to EN 13501-1)
Available thicknesses25-40
DesignationEPS EN 13163-T2-L2-W2-S2-P4-BS125-CS(10)80-DS(N)2-DS(70)1-TR150
Relevant specificationsEN 13163 and EN 13172
Product rangefrom 5 cm to 15 cm.
Depth of cutting15 mm.
Gross size of the b

50 cm×100 cm, net surface 48,5 cm×98,5 cm.
(*(Available only for special order and delivery time!))

  
 Isomaster EPS boards are also available with rebated edge. This shaping
makes possible the proper installation without thermal bridges in case of
one-layer application. Particularly recommended on facades by 10-15 cm
thick boards instead of straight edges.		 

 

With
Available
Code
2 cm
 0,24 m3/bale, 24 pcs/bale
 0501-08002000
3 cm
 0,24 m3/bale, 16 pcs/bale
 0501-08003000
4 cm
 0,24 m3/bale, 12 pcs/bale
 0501-08004000
5 cm
 0,25 m3/bale, 10 pcs/bale
 0501-08005000
6 cm
 0,24 m3/bale, 8 pcs/bale
 0501-08006000
7 cm
 0,245 m3/bale, 7 pcs/bale
 0501-08007000
8 cm
 0,24 m3/bale, 6 pcs/bale
 0501-08008000
10 cm
 0,25 m3/bale, 5 pcs/bale
 0501-08010000
12 cm
 0,24 m3/bale, 4 pcs/bale
 0501-08012000

Other thicknesses just at special order!

ISOMASTER EPS 100

Fields of application Load-bearing thermal insulating board of domestic floors or load-bearing floors with normal load and waterproof protection. It is also applicable as passable insulation of floors with OSB covering or concrete and in conventional flat roofs and in extensive green roofs.

Marking
 yellow line
Compression strength (10%) 100 kPa
Declared thermal conductivity (λD) 0.036 W/mK
Water vapour resistance factor (μ)20-40
DesignationEPS EN 13163-T1-L1-W1-S1-P4-BS150-CS(10)100-DS(N)5-DLT(1)5
  

 

With
Available
Code
1 cm
 0,25 m3/bale, 50 pcs/bale
 0501-10001000
2 cm
 0,24 m3/bale, 24 pcs/bale
 0501-10002000
3 cm
 0,24 m3/bale, 16 pcs/bale
 0501-10003000
4 cm
 0,24 m3/bale, 12 pcs/bale
 0501-10004000
5 cm
 0,25 m3/bale, 10 pcs/bale
 0501-10005000
6 cm
 0,24 m3/bale, 8 pcs/bale
 0501-10006000
7 cm
 0,245 m3/bale, 7 pcs/bale
 0501-10007000
8 cm
 0,24 m3/bale, 6 pcs/bale
 0501-10008000
10 cm
 0,25 m3/bale, 5 pcs/bale
 0501-10010000
12 cm
 0,24 m3/bale, 4 pcs/bale
 0501-10012000

 

ISOMASTER EPS 150*

Fields of application Load-bearing thermal insulating board of floors and slabs with higher load (max. 500kg/m2) and waterproof protection. It is also applicable in conventional flat roofs and in extensive or in intensive green roofs.

Marking
 black line
Compression strength (10%) 150 kPa
Declared thermal conductivity (λD) 0.035 W/mK
Water vapour resistance factor (μ)40-45
DesignationEPS EN 13163-T1-L1-W1-S1-P4-BS200-CS(10)150-DS(N)5-DLT(2)5
  

 

With
Available
Code
2 cm
 0,24 m3/bale, 24 pcs/bale
 0501-15002000
3 cm
 0,24 m3/bale, 16 pcs/bale
 0501-15003000
4 cm
 0,24 m3/bale, 12 pcs/bale
 0501-15004000
5 cm
 0,25 m3/bale, 10 pcs/bale
 0501-15005000
6 cm
 0,24 m3/bale, 8 pcs/bale
 0501-15006000
7 cm
 0,245 m3/bale, 7 pcs/bale
 0501-15007000
8 cm
 0,24 m3/bale, 6 pcs/bale
 0501-15008000
10 cm
 0,25 m3/bale, 5 pcs/bale
 0501-15010000
12 cm 0,24 m3/bale, 4 pcs/bale
 0501-15012000

 

ISOMASTER EPS 200*

Application Fields of application: Load-bearing thermal insulating board of floors and slabs with higher load (max. 750kg/m2) and waterproof protection. It is also applicable in conventional flat roofs and in extensive or in intensive green roofs

Marking
 2 × black line
Compression strength (10%) 200 kPa
Declared thermal conductivity (λD) 0.033 W/mK
Water vapour resistance factor (μ)40-45
DesignationEPS EN 13163-T1-L1-W1-S1-P4-BS250-CS(10)200-DS(N)5-DLT(2)5
  

 

With
Available
Code
2 cm
 0,24 m3/bale, 24 pcs/bale
 0501-20002000
3 cm
 0,24 m3 /bale, 16 pcs/ba
 0501-20003000
4 cm
0,24 m3/bale, 12 pcs/bale 0501-20004000
5 cm
 0,25 m3/bale, 10 pcs/bale
 0501-20005000
6 cm
 0,24 m3/bale, 8 pcs/bale
 0501-20006000
7 cm
0,245 m3/bale, 7 pcs/bale 0501-20007000
8 cm
 0,24 m3/bale, 6 pcs/bale
 0501-20008000
10 cm
 0,25 m3/bale, 5 pcs/bale
 0501-20010000
12 cm
 0,24 m3/bale, 4 pcs/bale
 0501-20012000

 *Only for order

ISOMASTER A 23/20; 34/30; 45/40 sound insulation boards

Field of application As an impact sound insulation on intermediate ceiling in floated
screed structure.

Installation
 The load-bearing capacity of the boards has to be taken into consideration at planning. After laying of the boards, a separating PE foil layer is necessary, if it will be covered by concrete. The thickness of this rigid screed above should be at least half as big as the insulation. In order to avoid sound bridges, along the connecting walls and around floor penetrations (e.g. pipes), minimum 5 mm thick ISOFOAM® border strip has to be installed.
Marking green line

Step-sound insulation improvement (Δ L'nw)

(according to ÖNORM B 8115-4, under
120 kg/m2 floating layer, with hard floor-covering)

23 dB (ISOMASTER® 23/20, 25 dB (ISOMASTER® 34/30), 26 dB (ISOMASTER® 45/40)
Standard marking

EPS EN 13163-T3-L1-W1-S1-P4-DS(N)5-SD50-CP5

(ISOMASTER® -A 23/20)
EPS EN 13163-T3-L1-W1-S1-P4-DS(N)5-SD40-CP5

(ISOMASTER® -A 34/30)
EPS EN 13163-T3-L1-W1-S1-P4-DS(N)5-SD30-CP5

(ISOMASTER® -A 45/40)

  
ISOMASTER® Impact-sound insulating board with low dynamic stiffness. The numbers in the designation of the products refer to the thickness of the boards in unloaded/loaded condition.

 

Thicknessv
Available
Code
23/20 mm
 0,23 m3/bale, 20 pcs/bale
 0509-02320000
34/30 mm
 0,238 m3/bale, 14 db/bale
 0509-03430000
45/40 mm
 0,225 m3/bale, 10 pcs/bale
 0509-04540000

 

ISOMASTER EPS-G

Material expanded polystyrene

Colour
 gray
Fields of application Thermal insulation of external thermal insulation systems.
The improved thermal resistance of this material makes possible the lower applied thickness of the EPS boards, that is especially useful e.g. around windows.
Designation EPS EN 13163 T2-L2-W2-S2-P4-BS125-CS(10)80-DS(N)2-DS(70,-)3-TR150
Compression strength (10%)80 kPa
Size of board50 cm×100 cm
Thermal conductivityλD = 0,034 W/mK
Reaction to fire:Class: E (according to EN 13501-1)
Relevant specificationEN 13163, EN 13172
Available thicknesses2-3-4-5-6-7-8-10-12-15-20 cm
(Other ticknesses are also available for special order and delivery time!)
  

 

Thickness
Available
Code
2 cm
 0,24 m3/bale, 24 pcs/bale
 0541-08002000
3 cm 0,24 m3/bale, 24 pcs/bale 0541-08003000
4 cm 0,24 m3/bale, 24 pcs/bale 0541-08004000
5 cm 0,25 m3/bale, 10 pcs/bale 0541-08005000
6 cm 0,24 m3/bale, 24 pcs/bale 0541-08006000
7 cm 0,245 m3/bale, 7 pcs/bale 0541-08007000
8 cm 0,24 m3/bale, 24 pcs/bale 0541-08008000
10  cm 0,25 m3/bale, 5 pcs/bale 0541-08010000
12 cm 0,24 m3/bale, 24 pcs/bale 0541-08012000
15 cm 0,225 m3/bale, 3 pcs/bale 0541-08015000
20 cm 0,225 m3/bale, 3 pcs/bale 0541-08020000