| Material | EPS beads coated with cement and special surface-activated additive
| 
|
Application
| For the thermal insulation of non-passable surfaces of lofts (11–12 cm): P200 For the thermal insulation of passable surfaces of lofts (12–14 cm): P250 + 1–2 cm of cement mortar finishing
Filling-up material of slabs, for slope formation on deck roofs and under base concretes: P350 Filling up material around sunk swimming pools: P250
|
| Installation | Thermobeton can be mixed with a conventional concrete mixer for slightly plastic consistency. The freshly installed concrete has to be immediately covered with PE foil for 3–4 days, to avoid the too fast drying of the material, additional watering is not necessary. Applicable thickness: min. 5 cm – max. 40 cm, the necessary temperature is above (+)5°C.
(For more information see the detailed application of the product).
|
| Mixing proportions | for 1m3 lightweight concrete:
• P200 (density 200 kg/m3): 1.05 m3 Thermobeton+80 kg cement+70 litres of water
• P250 (density 250 kg/m3): 1.08 m3 Thermobeton+120 kg cement+100 litres of water
• P350 (density 350 kg/m3): 1.12 m3 Thermobeton+200 kg cement+140 litres of water
|
| Density (kg/m3) | 200 (P200), 250 (P250, 300 (P50) |
| Compressive strength (kN/m2) | 120 (P200), 230 (P250, 340 (P50) |
| Thermal conductivity λD (W/mK) | 0,05 (P200), 0,065 (P250, 0,082 (P50) |
| Available | 0.2 m2/bag |
| | |
