Catalog


Catalog mainpage » Thermal–sound and water insulation materials » Bituminous Waterproofing Membranes
 

MASTERBIT 03GV and 04GV oxidized bitumen sheets

Thickness 3 mm ±10% (3GV), 4 mm ±10% (4GV)

Weight
3400 g/m2 ±200g (3GV), 4600 g/m2 ±230g (4GV)
Material of reinforcement Non-woven glass veil
Type if bitumen oxidized
Surface protection, lowerside/uppersidePE foil/fine mineral sanding
Width100 cm ±1%
Length10 fm ±1%
Cold bending capacity+5 °C
Heat resistance+80 °C
  

 


Available
Code
MASTERBIT 03 GV
 24 roll/pallett
 0612-03010000
MASTERBIT 04 GV
 15 roll/pallett
 0612-04010000

 

MASTERBIT PRO VM40 Modified bituminous membranes with mineral slates, glass veil

Material Non-woven glassveil carrier with APP modified bitumen covered with fine gray slate granules upperside and PE foil underside

Fields of application
 Intended to be used on smaller, reinforced concrete slab surfaces - exposed to moderate mechanical- and heat load and stress - as a top layer.
Weight 4000 g/m2 ±10%
Material of reinforcement Non-woven glass veil
Type of bitumenAPP-modified
Surface protection below/abovePE foil/gray slate granules
Width100 cm ±1%
Length10,0 running metres ±1%
Flexibility at low temperature0 °C
Flow resistance at elevated temperature+100 °C
  
UV-resistant top layer of waterproofing systems.

 


Available
Code
MASTERBIT PRO VM40
 25 roll/pallett
 0612 – 04P10000

 

MASTERBIT PRO PM4 Modified bituminous membranes with mineral slates, with PES reinforcement

Material Non-woven polyesterfabric carrier with APP modified bitumen covered with fine gray slate granules upperside and PE foil underside

Fields of application
 Intended to be used on bigger, reinforced concrete slab surfaces - exposed to higher mechanical- and heat load and stress - and also at the vertical part of the attics as a top layer.
Thickness 4 mm ± 10%
Material of reinforcement Non-woven polyesterfabric
Type of bitumenAPP-modified
Surface protection below/abovePE foil/gray slate granules
Width100 cm ± 1%
Length7,5 running metres ± 1%
Flexibility at low temperature–5 °C
Flow resistance at elevated temperature+120 °C
  
UV-resistant top layer of waterproofing systems.

 


Available
Code
MASTERBIT PRO PM4
 25 roll/pallett
 0613 – 04P75000

 

MASTERBIT PRIMER WBP water dispersion bitumen-based primer

CoveringOn concrete, plaster and brick surfaces: 0.2–0.4 l/m2 (depending on the surface)

Precautions during application
Proper ventilation must be ensured during application in
closed spaces. It has an alkaline effect, thus direct contact with eyes and skin must be avoided. Wearing of safety gloves, closed protective clothing and safety goggles (when spray gun used for priming) is recommended.
Storage, expiry date
The product has to be handled, transported and stored according to the rules prescribed for the material. It has to be protected from direct sunlight and frost. Storing temperature is between (+) 5 °C and (+) 35 °C. In case of the prescribed storage and handling conditions, the expiry date of the product is 6 month after production.
 Packaging10 kg
  

Designed to seal and prepare surfaces for the application of bituminous waterproofing sheets. Dilution of the primer is not necessary, but it is possible with maximum 30% water. Ambient and product temperature must be minimum (+)5°C during application.

 


Code
MASTERBIT PRIMER WBP water-based bituminous primer0611-00015000

 

MASTERBIT PRIMER SP solventbased bituminous primer

Covering
On concrete, plaster and brick surfaces: 0,2 l/m2 (depending on the surface)

Precautions during application

The material is highly inflammable, thus during storing and
application the necessary safety precautions must be kept. In closed spaces using of Masterbit Primer WBP is recommended.
It has a strong ammoniac smell and an alkaline effect, thus direct contact with eyes and skin must be avoided. Wearing of safety gloves, closed protective clothing and safety goggles (when spray gun used for priming) is recommended.

Storage, expiry date
The product has to be handled, transported and stored according to the rules prescribed for the material. It has to be protected from direct sunlight and ignition source. In case of the prescribed storage and handling conditions, the expiry date of the product is 6 month after production. Storing temperature is between (+) 5 °C and (+) 35 °C.
Packaging10 kg
  

Designed to seal and prepare surfaces for the application of bituminous waterproofing sheets.
Dilution of the primer is not necessary in case of normal ambient temperature.

 


Code
MASTERBIT PRIMER SP solvent-based bituminous primer0611-00010000