Catalog


Catalog mainpage » Thermal–sound and water insulation materials » Drainage Sheets
 

TERRAPLAST PLUS S8 HDPE dimpled sheet

Unit weight550±5% g/m2

Height of dimples8 mm
Compression strength250 kN/m2
Air volume between the dimples~5.5 l/m2
  

 

TERRAPLAST® PLUS S8AvailableCode
1 m
1.0 m × 20 m
0604-08010000
1.5 m
1.5 m × 20 m
0604-08015000
2 m
2.0 m × 20 m
0604-08020000
2.5 m
2.5 m × 20 m
0604-08025000

 

TERRAPLAST PLUS L8 HDPE dimpled sheet

Unit weight 420±5% g/m2

Height of dimples
 8 mm
Compression strength 170 kN/m2
Air volume between the dimples ~5.5 l/m2
  
This product is similar to TERRAPLAST® PLUS S8 HDPE dimpled sheet with reduced compression strength. Due to the smaller loadabiity, it can be used up to maximum 4m depth at vertical installation.

 

TERRAPLAST® PLUS L8
Available
Code
1 m
 1.0 m × 20 m
 0604-08L10000
1.5 m
 1.5 m × 20 m
 0604-08L15000
2 m
 2.0 m × 20 m
 0604-08L20000
2.5 m
 2.5 m × 20 m
 0604-08L25000

 

TERRAPLAST PLUS GEO HDPE dimpled sheet with non-woven polypropylen filter layer lamination

Unit weight 700±5% g/m2

Height of the dimples
 8 mm
Compression strength 250 kN/m2
Air volume between the dimples 5,5 l/m2
  
Draining o the water is performed between the dimples of the HDPE sheet and the PP filter layer. It is able to divert dammed-up water further (1–2 m) from the building as well. It can also be used for the sinking of ground water level (e.g. horizontally installed under the surface of fields), used together with a proper drain pipe.

 

TERRAPLAST® PLUS GEO
Available
Code
2 m
 2 m × 15 m
 0604-08G20000

 

TERRAPLAST PLUS S20 HDPE dimpled sheet

Unit weight1000±5% g/m2

Height of dimples
20 mm
Compression strength
180 kN/m2
Air volume between the dimples
~14 l/m2
  
Due to the 20 mm-high dimples, it enables to drain a large quantity of groundwater, especially in civilengineering and underground tunnel constructions. Applied onto shotcrete or curtain walls, it protects
waterproof, reinforced concrete walls against seepage water during construction, and then keeps it
away for a long-time.

 

 AvailableCode
 TERRAPLAST® PLUS S201.9 m × 20 m0606-20019000

 

TERRAPLAST PLUS S20P “PERFORATED” HDPE dimpled sheet

Unit weight
1000±5% g/m2

Height of dimples
20 mm
Compression strength
180 kN/m2
Air volume between the dimples
~14 l/m2
  
Water draining and water retaining layer for green roofs with vegetation, while also serving for the protection of the non-root-resistant waterproofing layer.

 

 AvailableCode
 TERRAPLAST® PLUS S20P1.9 m × 20 m0606-20P19000

 

TERRAPLAST PLUS-AC fastening nail and button

  

Serves for the fastening of the vertically installed TERRAPLAST PLUS dimpled sheets with 8mm high dimples. Consists of a steel fastening nail and a perforated plastic button. This button fits into the dimples of the plate, thus the nail fastens the sheet without tearing or destruction. Fixing of the sheets is allowed only over the level of the waterproofing, minimum 5 cm far from the upper edge and 20 cm from one another.

 


Available
Code
TERRAPLAST® PLUS-AC fastening nail and button
 100 pc nails and buttons/box
 0605-200F0000

 

TERRAPLAST PLUS-AC edge sealing strip

The sealing strip prevents the soil to get into the gap between the dimpled sheet and the waterproofing.
Made of HDPE, fixed along the upper edge of the Terraplast Plus sheet. A further role of its to channel the majority of the water flowing down onto the outer surface of the sheet.

 

 AvailableCode
 TERRAPLAST® PLUS edge sealing strip2 m/pcs0605-10020000

 

TERRAPLAST PLUS AC Bituband

A self-adhesive sealing strip for the watertight overlapping and joints of the sheets

 AvailableCode
 TERRAPLAST® PLUS-AC butyl sealing band19 mm×30 m/roll0605-30030000

TERRAPLAST DRAIN-AC

Material
yellow PVC or black LPE drain pipe

ApplicationPerforated flexible plastic drain pipes for collecting and draining underground waters collected by TERRAPLAST® PLUS dimpled sheets or other draining products (e.g. shape-foamed XPS thermal insulations with filter layer lamination).The PVC drain pipe is sensitive to extensive UV radiation, easily breaks in cold weather. The black LPE drain pipe has better mechanical properties and UV-resistance. During installation, it has to be laid minimum 20 cm below the TERRAPLAST® PLUS sheet, onto a lean-concrete sub-base with a gradient of 2% embedded into graded gravel and surrounded by filtering geotextile. Both type of drain pipes are available with factory-made geotextile lamination as well (TERFIL Drain), but the pipe is not UV resistant even then.
  

 

TypeAvailableCode
TERRAPLAST® DRAIN-AC PVC (yellow) perf. 50 mm
250 m/roll
0609-11005000
TERRAPLAST® DRAIN-AC PVC (yellow) perf. 100 mm
100 m/roll
0609-11010000
TERRAPLAST® DRAIN-AC LPE (black) perf. 80 mm
100 m/roll
0609-12008000
*TERRAPLAST® DRAIN-AC T-PVC (yellow) terf. 50 mm
250 m/roll
0609-21005000
*TERRAPLAST® DRAIN-AC T-PVC (yellow) terf. 100 mm
100 m/roll
0609-21010000
*TERRAPLAST® DRAIN-AC T-LPE (black) terf. 80 mm
100 m/roll
0609-22008000

 *ONLY FOR ORDER